The satellite antenna is an artificial satellite, which is placed in space. The main purpose of satellite antenna is to serve communication. It solves the purpose of reconnaissance with the use of radio at microwave frequencies. An earth station is located on the ground, which use to transmit the radio waves. The satellite antenna use geosynchronou...
The satellite antenna alignment is used to calculate the angles necessary for installing satellite dishes. The major difference from similar software is the possibility to calculate the position for all satellites at once. One can get a clear picture about what satellites can be physically detectable from the location where the dish will be install...
Before eternally mounting the antenna for digital television reception it is a good idea to perform a quick view survey to find the spot with the best signal. Moving the antenna one way or another just a few feet can make a wonderful difference in the success of the antenna installation. Digital television is a little different than analog TV. With...
The omni directional antenna is an antenna system that radiates power uniformly in all directions. The only 3 dimensional omni directional antenna is the isotropic antenna, a hypothetical construct derived from actual antenna radiation patterns and used as a suggestion for specifying antenna gain and radio system effective radiated power. Practical...
An antenna that is able to receive signals from many directions is called a multi directional antenna. There are many size and shapes of multi directional antennas. They have different features. There are mainly two types of multi directional antennas, one being the indoor antenna and the other being the outdoor antenna. The indoor antennas can be ...
A loop antenna is primarily used for the AM broadcast and the bands of Long wave. Mainly there are two types of loop antennas, among them one is ferrite bar same as the am radio and other is in the form of air core. A loop antenna is multidirectional. A loop antenna will receive the signals on the opposite side and off side of the antenna signal wi...
Reception is a process of receiving electromagnetic signals through antennas. If the antenna is placed next to the transmitter then there would be a perfect reception of signals. But it is not possible for everyone to have his or her antenna next to the transmitter. There will be a proper reception of signals in the nighttime. This is because there...
One can build wireless home network, a wireless LAN by using simple three-step approach like identify the WLAN design that is best for the situation. Choose good wireless gear and install gear and test the configured WLAN. Though prices have dropped severely from a few years ago when wireless gear was quite expensive. Benefits of Wireless: Wi...
The best way to describe a basic television antenna is low tech. Television antennas feature a series of fundamentals cut to exact lengths which are designed to receive a attuned frequency from a transmitted television indications. Each element has a pair of metal rods extending from an explosion. The main difference between various brands of telev...
There are many ways to place the antenna at the home. Mainly three ways are used to place antenna at the home. One can place the antenna on the roof of the house. It is considered to be the best place for the antenna. In this case the working of antenna depends on the clearness of the sky. The clearer the view of the sky, more clear will be the sig...