The satellite antenna is an artificial satellite, which is placed in space. The main purpose of satellite antenna is to serve communication. It solves the purpose of reconnaissance with the use of radio at microwave frequencies. An earth station is located on the ground, which use to transmit the radio waves. The satellite antenna use geosynchronou...
The satellite antenna alignment is used to calculate the angles necessary for installing satellite dishes. The major difference from similar software is the possibility to calculate the position for all satellites at once. One can get a clear picture about what satellites can be physically detectable from the location where the dish will be install...
Antennas are the transmission devices used to transmit audio and visual frequencies in the form of electromagnetic waves. The maximum use of antennas is in radios with special antennas available for satellite radio reception. The antennas are designed according to purpose and accordingly there are exclusive home antennas designed for satellite radi...
Before eternally mounting the antenna for digital television reception it is a good idea to perform a quick view survey to find the spot with the best signal. Moving the antenna one way or another just a few feet can make a wonderful difference in the success of the antenna installation. Digital television is a little different than analog TV. With...
These are the antennas that are placed outside the house. An outdoor antenna can be slightly tilted to get better results of receiving signals. These antennas occupy large space. This gets signals directly from the satellite. Some of the outdoor antennas are good at receiving reflected signals. Outdoor antennas can be placed at the rooftop, railing...
It is an electronic device used to transmit and receive radio signals. A directional antenna is an antenna that radiates greater power in one or more directions. This allows increased performances on transmit and receive and receive and reduced interference from unwanted sources. All the antennas are slightly directional. The normal antennas have a...
A loop antenna is primarily used for the AM broadcast and the bands of Long wave. Mainly there are two types of loop antennas, among them one is ferrite bar same as the am radio and other is in the form of air core. A loop antenna is multidirectional. A loop antenna will receive the signals on the opposite side and off side of the antenna signal wi...
Television antenna signals are strongest and reception is generally the best when the station's transmitting tower is in clear line of vision with the home receiving the broadcast. Mountains, buildings or trees that block this line of sight tend to weaken and degrade the received signal. The signal also becomes weaker as it travels further from the...
Reception is a process of receiving electromagnetic signals through antennas. If the antenna is placed next to the transmitter then there would be a perfect reception of signals. But it is not possible for everyone to have his or her antenna next to the transmitter. There will be a proper reception of signals in the nighttime. This is because there...
Antenna is an electronic device. It is an arrangement of aerial electronic conductors. These are designed to transmit or receive radio waves or electromagnetic waves. Heinrich Hertz discovered an antenna in 1886. Basically the antennas convert radio frequency electric current into an electromagnetic wave. Antennas have a wide range of usage. They a...