Keep the machine clean. Regularly clean the machine and the rollers. If there are any signs of paint flakes from the gutter inside the machine, shut down immediately, correct the problem, and clean the machine before proceeding.
Inspections: Carefully inspect sections of gutter from the machine and note any irregularities or defects. Regularly inspect the machine in accordance with the operating manual.
Lubrication Storage: The manufacturers generally recommend you store your machine indoors if possible. You have invested a lot of hard-earned money in your gutter machine. Sock Woodruff is founder and partner of GutterSupply.com, the leading manufacturer and distributor of gutter supplies, gutter machines, and related tools and equipment.
MAINTENANCE : Proper operation of a seamless gutter machine—and a long machine life—is highly dependent on regular maintenance and care given to the machine. All the machine manufacturers will tell you a machine can last 20, 25, or 30 years, perhaps even more. In the opinion of at least one machine manufacturer, the most successful gutter companies use an enclosed trailer, van, or truck to transport their gutter machines. Because it keeps your machine clean and dry.
The second reason is to properly operate the machine so it will produce hi-quality gutter and avoid damage to the machine. A seamless gutter machine typically produces about 30 feet of gutter per minute. In most cases the gutter machine will have been transported to the worksite with a coil of material on the machine and then run through the machine. Remove the cover tarp from the machine, if present.
The reason for that success is keeping the machine CLEAN and DRY.
Every other gutter machine manufacturer also stresses the importance of keeping the interior of their machines clean. Think of that coffee or sugar rich soda running through the electric motor or controls of your $15,000 combination gutter machine. Even paint chips that have flaked off a gutter because of severe maladjustment of the machine can damage a roller.
Rain gutters are a feature that virtually all houses share. Water, water everywhere.
Gutter Materials : The metal stock from which the gutter is formed can be aluminum, galvanized steel, copper, or a hybrid version of one of these metals. Seamless gutters made of aluminum are the most common today.
Why Seamless Gutters? : Seams are always possible leak points in a gutter system. Seamless gutters virtually eliminate this leakage problem.
Your rain gutters were put there to protect your house. When the rain runs down the roof, it washes all this into the rain gutter. On a smaller scale, that’s what can also happen in you rain gutters.
Material collects in the gutter instead of coming down the downspout. One simple design is a gutter screen, which uses some form of screen to catch the solids and pass the water. Screens are simple to install and keep most of the leaves and debris out of your gutters. The hood covers the entire gutter and has just a tiny channel for the water to enter the gutter.
A hybrid gutter cover is much the same as a hood with many of the features of the gutter screen. A newer technology is the gutter filter. This system uses a filter membrane installed inside the gutter.
Sock Woodruff is founder and partner of GutterSupply.com, the leading manufacturer and distributor of gutter supplies, gutter machines, gutter covers, and related tools and equipment.